Volume: 79m³

Temperature: 1150°C

Walking beam furnace for heat treatment of rod materials up to 180mm in diameter and up to 3m in length.

Volume: 32m³

Temperature: 1100°C

Bell type furnace in which the dome, in addition to vertical movement, also has horizontal movement along the rails. This enables two such furnaces to be connected at a certain place in the hall and thus double the working volume.

Volume: 390m³

Temperature: 1150°C

One of the largest chamber furnaces ever designed. The volume of the working space is 390m³. The weight of the workpiece with supports is 300t.

Volume: 9m³

Temperature: 1300°C

Volume: 71m³

Temperature: 1100°C

Walking beam furnace for heat treatment of bar materials up to 70mm in diameter and up to 10m long.

Volume: 15m³

Temperature: 950°C

Production line for heat treatment 55m long.

Volume: 12m³

Temperature: 950°C

Bell type furnace. In order to save space in the hall, most of the equipment is located on the supporting structure of the furnace. The workpiece is located on a mobile platform that has an independent drive.

Volume: 2m³

Temperature: 1250°C

The workpieces of this furnace are plates. The maximum dimensions of the board are 7500mm long, 2950mm wide and 90mm thick. These dimensions have led to the design of the door requiring a special supporting structure.

Manipulator for furnaces that are also designed in our company. It has four degrees of freedom: three translations and one rotation.

Tempering pool. The depth of the pool is 4m. A cooling water treatment station was also part of the project.

Volume: 8m³

Temperature: 1150°C

An industrial manipulator with four degrees of freedom.

Volume: 30m³

Temperature: 1150°C

Two pit furnaces, next to each other, for heat treatment of shafts up to 8m long. The depth of the pit was 8m, so one part of the furnace construction had to be above the zero level of the hall.

Volume: 40m³

Temperature: 1200°C

Chamber type furnace with a movable platform on which the workpiece is located. The mobile platform has its own drive located on the supporting structure.

Volume: 171m³

Temperature: 1050°C

Furnace-spray system for heat treatment of shafts up to 16m long and weighing up to 100t. The height of the construction is over 23m. One of the largest furnaces of this type in the world.

Volume: 210m³

Temperature: 1150°C

Pit type furnace for heat treatment of rotor diameter 2500mm and weight up to 200t. 13 temperature zones. About 4MW of installed capacity.

Automated washing and degreasing machine.